PRODUCT SPECS

Operating weight: 15,432 lbs (7,000 kg)
Engine power: 100 HP (74.4 kW)
Bucket capacity: 1.57-2.35 yd3 (1.2-1.8 m3)
Tipping load, straight: 11,023 lbs (5,000 kg)
Tipping load, articulated: 9,700 lbs (4,400 kg)

OPERATING DATA, STANDARD EQUIPMENT
Operating weight (SAE J 1197): 15,432 lbs (7,000 kg)
Tipping load, straight at full reach (ISO 14397-1): 11,023 lbs (5,000 kg)
Tipping load, articulated at full reach (ISO 14397-1): 9,700 lbs (4,400 kg)
Total length, bucket on ground: 17' 11" (5,480 mm)
Total width: 6' 11" (2,100 mm)
Turning radius at outside bucket edge: 15' 4" (4,680 mm)
Wheelbase: 7' 6" (2,290 mm)
Total height (top of cab): 9' 1" (2,780 mm)

ENGINE
Manufacturer, model: Deutz, TCD3.6 L4
Type: 4-cylinder turbo diesel engine with intercooler, EPA Tier 4 Final / EC Stage IV
Combustion: 4-stroke cycle, Common Rail injection
Displacement: 220 in3 (3,600 cm3)
Net power rating at 2,200 rpm (SAE J 1349): (100 hp) 74.4 kW
Cooling system: Water

ELECTRICAL SYSTEM
Nominal voltage: 12 V
Battery: 12 V / 135 Ah
Generator: 14 V / 95 A
Starter: 12 V / 3.5 hp (2.6 kW)
Cold-starting aid: Glow plugs

Lighting system in compliance with US/ISO standards, H7 headlamps.

POWER TRANSMISSION
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm.

4 speeds:
“Low”: 0-3.7 / 0-11.8 mph (0-6 / 0-19 kph)
“High”: 0-6.8 / 0-22 mph (0-12 / (0-36 kph)

AXLES
Rigid front axle with 45% limited slip differential. Oscillating rear axle with 45% limited slip differential. Center-mounted disc brake.

TIRES
Standard: 405/70 R 20 SPT 9 Dunlop

BRAKES
Service brake: Hydraulically actuated center-mounted drum brake, acting on all 4 wheels via 4-wheel drive.
Auxiliary brake: Hydrostatic through closed-circuit travel drive.
Parking brake: Mechanically actuated center-mounted drum brake on front axle.

STEERING
Articulated, 2 steering cylinders with final positioning damping on both sides, fully hydraulic through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.

Total steering angle 80 deg.

FLUID CAPACITIES
Fuel tank: 29 gal (110 l)
Hydraulic system (incl. tank): 25 gal (93 l)
Ad Blue Tank: 2.6 gal (10 l)
Engine coolant: 3.9 gal (15 l)
Engine oil: 2 gal (8 l)

HYDRAULIC SYSTEM
Pump capacity: 20 gpm (78 l/min)
Working pressure: 3,625 psi (250 bar)

Control unit: Proportional hydraulic valve with 3 control circuits and high-speed control for tilting. Simultaneous, independent control of all movements. Single, four-way control lever (multi-function lever) for tilt and lift cylinder with integrated travel direction selector switch and switch for additional control circuit. Float position in control circuit "Lowering", electro-hydraulically operated. Additional control circuit including quick couplers and continuous operation function provided as standard.

Hydraulic cylinders: 1 lifting cylinder, 1 tilt cylinder, all dual-action

The thermostatically controlled oil circuit ensures that the oil temperature is promptly reached and avoids overheating. Return filter installed in hydraulic tank allows for eco-friendly replacement of filter elements

Fingertip control for 3rd control circuit, electro-proportional, oil flow limitation via machine function display, continuous operation. Installation on loader frame incl. couplings.

Hydraulically switchable float position by overdriving the pressure point “Lower” on the joystick, electrically switchable continuous operation function.

Single, four-way control lever (joystick) with integrated direction-of-travel switch and switch for additional control circuit.

LOADER FRAME
Loader installation featuring true parallel linkage and hydraulic quick coupler.

General-purpose bucket (SAE J 742): 1.57 yd3 (1.20 m3)
Lift capacity at ground level (SAE J 732): 15,962 lbf (71,000 N)
Breakout force at bucket edge (SAE J 732): 13,264 lbf (59,000 N)

FORK LIFT ATTACHMENT
Operating load (SAE J 1197), over the total lift and steering range: 4,120 lbs (1,905 kg)*
Operating load in transport position, above ground level, total steering range: 4,948 lbs (2,244 kg)*
Width of fork carrier: 49" (1,240 mm)
Length fork tines: 5.5" x 2" (140 mm x 50 mm) 44" (1,120 mm)
Stability factor on level and solid ground: 2

Operating load determined on level ground = 80 % of tipping load, articulated

CAB
Rubber-mounted full-vision steel cab, ROPS (EN ISO 3471) and FOPS** (EN ISO 3449) certified.

Cab featuring two doors, intermittent wipers and washer (front and rear), tinted panoramic safety glass, sliding window on left-hand side.

Driver's seat MSG85 (standard version) with hydraulic cushioning and lap belt, weight-adjustable, in compliance with ISO 7096 and ISO 6683.

Cab heating with 3-speed heater fan (choice fresh air/recirculating air) and windshield defroster, front and rear.

Standard: Air conditioning. Back-up alarm for reverse travel. Battery disconnector. Guard for V-belt. Immobilizer, electronic, keypad operation. 2 working floodlights, front. 2 working floodlight, rear. Rear axle weights, approx. 660 lbs (300 kg). Steering wheel with height and tilt adjustment.

Cab exterior noise level: 101 dB (A)
Cab interior noise level: 74 dB (A)

Noise level values measured in compliance with Directive 2000/14/EC and EN474.
*With rear axle weights
**FOPS-approved only with skylight guard (optional)

PRODUCT REVIEWS

No reviews of this machine

There are currently no reviews of this machine. To leave one email info@projectequipment.ca